Tie-rods cylinders according to ISO 6020-2 and DIN 24554.

Fourteen mounting styles available, as well as a vast range of accessories to meet all application requirements.

Versions rated for ATEX II 2GD and ATEX II 3GD are available.

The DSE3K*, DSPE5K*, DSPE5RK*, DSPE7K*, DSPE8K* and DSPE10K* are explosion-proof proportional directional valves, for subplate mounting.

They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available.

They are used to control the position and speed of the hydraulic actuators. Spools with open center, closed center and for regenerative circuits are available. Pilot supply can be internal, internal with built-in pressure reducing valve, or external. Internal or external drainage. The valves are available with 12 or 24 V solenoid.

Several connection types are available, metric or NPT type. Cable glands are available. They can be controlled directly by a current-controlled power supply, or by an electronic card, to be order separately.

The ZDE3K* are explosion proof proportional pressure reducing direct operated pressure valves, for subplate mounting.

They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available.

They are used to reduce pressure in the secondary circuit branches thus ensuring stability of controlled pressure in the event of variations of the flow rate through the valve. Adjustment available on A, B or both. The valves are available with 12 or 24 V solenoid.

Several connection types are available, metric or NPT type. Cable glands are available.

The PDE3K*, PRE3K*, PRE10K*, PRE25K* and PRE32K* are explosion proof proportional pressure control valves, direct and pilot operated, for subplate mounting.

They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available.

They are used to modulate the pressure of the hydraulic circuit and allow the use of the entire flow of the pump, even with pressure values near the set value. They have a mechanical pressure limitation feature inside the pilot stage, for higher safety of the application. The valves are available with 12 or 24 V solenoid.

Several connection types are available, metric or NPT type. Cable glands are available.

The DT3K* are direct operated poppet valves with solenoid actuation, explosion-proof. For subplate mounting. They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines.

A low temperature version (up to – 40 °C) is also available. Monobloc steel coil version is available. They are 3-ports, normally open or normally closed, with spring return. These valves apply in hydraulic circuit applications where leakage free is strictly required. The valves are available with DC solenoid or RAC solenoids to be feed with AC power supply. Rectifier bridge is built-in in the coil. Several connection types are available, metric or NPT type. Cable glands are available.

The D*K* are explosion-proof directional solenoid valves for subplate mounting. DS3K* and DSL5BK* are direct operated. DSP5RK*, DSP5K*, DSP7K*, DSP8K* and DSP10K* are pilot operated.

They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available. The valves are available with DC solenoid or RAC solenoids to be feed with AC power supply. Rectifier bridge is built-in in the coil. Several connection types are available, metric or NPT type. Cable glands are available.

RQM3K*- P RQM5K*- P and RQM7K*- P are explosion proof, solenoid actuated pressure relief valves, with unloading and pressure selection. They are suitable for flowrates up to 500 l/min, for subplate mounting.

They are compliant with ATEX, IECEx, INMETRO or PESO requirements and are suitable for use in potentially explosive atmospheres, for surface plants or mines. A low temperature version (up to – 40 °C) is also available.

Five versions are available, for the discarge of the entire flow by a solenoid valve or for selection of up to 3 pressure values: the selection of the second and third pressure value is obtained by means of a pressure relief valve placed between the main stage and the solenoid valve. Ports for remote pilot supply of the valve and for pressure gauge are present.

The valves are available with DC solenoid or RAC solenoids to be feed with AC power supply. Rectifier bridge is built-in in the coil. Several connection types are available, metric or NPT type. Cable-glands are available.