EWO - HIGH PRESSURE PNEUMATIC FILTERS Archives - Flowlines Technology LLC https://flowlinestechnology.com/product-category/ewo/ A Complete Solution on Hydraulics. Wed, 21 Jun 2023 06:10:02 +0000 en-US hourly 1 https://flowlinestechnology.com/wp-content/uploads/2023/03/cropped-Favicon-32x32.png EWO - HIGH PRESSURE PNEUMATIC FILTERS Archives - Flowlines Technology LLC https://flowlinestechnology.com/product-category/ewo/ 32 32 Fully Automatic – Drain Valve https://flowlinestechnology.com/product/fully-automatic-attachment-drain-valve/ Wed, 21 Jun 2023 06:07:02 +0000 https://flowlinestechnology.com/?post_type=product&p=1910 Fully automatic add-on drain valves can be attached to all filter or filter pressure reducers in the ewo range instead of manual or semi-automatic drains, since both inserts for Ø 14 are suitable for attachment at any time.

The post Fully Automatic – Drain Valve appeared first on Flowlines Technology LLC.

]]> Fully automatic add-on drain valves can be attached to all filter or filter pressure reducers in the ewo range instead of manual or semi-automatic drains, since both inserts for Ø 14 are suitable for attachment at any time.

It can be attached to tanks with a G ⅛ socket thread at any time. When a certain condensate level is reached, the float actuates a pneumatic servo valve and the drain valve opens. The valve closes again after blowing it out for a short time.

Manual emergency actuation is carried out by pressing in the horizontally protruding pin (automatic attachment A) or by pressing the
red disc upwards (automatic attachment B).

The post Fully Automatic – Drain Valve appeared first on Flowlines Technology LLC.

]]> Hand Tire Inflation Gauge https://flowlinestechnology.com/product/hand-tire-inflation-gauge/ Wed, 21 Jun 2023 06:00:30 +0000 https://flowlinestechnology.com/?post_type=product&p=1908 The classic manual filling gauge with manometer Ø80 is the typical professional device for gas stations and workshops. .

The post Hand Tire Inflation Gauge appeared first on Flowlines Technology LLC.

]]> The classic manual filling gauge with manometer Ø80 is the typical professional device for gas stations and workshops. 

By connecting to the air network, any air requirement can be covered, eg refilling during assembly. The single-lever operation for deflating (pressed halfway) and filling (pressed fully) makes handling easy to use. 

Pressure range especially for car tires 0 – 12 bar. Available with tried and tested lever connector, quick moment connector, cranked double petrol station connector (especially suitable for twin or motorcycle tires) or with quick connector.

The connection is made via a coupling plug DN 7.2. The filling hose is rotatable. Also suitable for tire gas (nitrogen).

The post Hand Tire Inflation Gauge appeared first on Flowlines Technology LLC.

]]> Soldering Torch https://flowlinestechnology.com/product/soldering-torch/ Wed, 21 Jun 2023 05:48:18 +0000 https://flowlinestechnology.com/?post_type=product&p=1907 Soldering Torch - Air intake in torch insert

The post Soldering Torch appeared first on Flowlines Technology LLC.

]]> The propane flame with sucked air (1300 to 1400°C) serves as a heat source for many processes, such as soft soldering, brazing, annealing, hardening, melting, etc., but also for direct use of the flame when burning off old paint and the like

The post Soldering Torch appeared first on Flowlines Technology LLC.

]]> Semi-Automatic Drain Valve https://flowlinestechnology.com/product/semi-automatic-drain-valve/ Wed, 21 Jun 2023 05:38:02 +0000 https://flowlinestechnology.com/?post_type=product&p=1906 Semi-automatic drain valves are open when depressurized (up to approx. 0.5 bar) and are opened manually at higher pressures. They are therefore used wherever the compressed air supply is shut off at least overnight.

The post Semi-Automatic Drain Valve appeared first on Flowlines Technology LLC.

]]> Semi-automatic drain valves are open when depressurized (up to approx. 0.5 bar) and are opened manually at higher pressures. They are therefore used wherever the compressed air supply is shut off at least overnight.

With the appropriate insert, installation in all plastic tanks and metal tanks with a sight glass is possible. When installing in metal tanks without a sight glass or G ⅛ socket thread, the insert is not required, which, by the way, differs from the insert for the manual drain.

The manual operation is carried out by pushing up the brass disc above the grommet for the condensate drainage hose, which can be fitted if required.

The post Semi-Automatic Drain Valve appeared first on Flowlines Technology LLC.

]]> Blow Guns With Standard Nozzle https://flowlinestechnology.com/product/blow-guns-with-standard-nozzle/ Wed, 21 Jun 2023 05:32:04 +0000 https://flowlinestechnology.com/?post_type=product&p=1905 The classic blowgun itself, tried and tested millions of times over for generations.

The post Blow Guns With Standard Nozzle appeared first on Flowlines Technology LLC.

]]> The classic blowgun itself, tried and tested millions of times over for generations.

Extensive range of accessories for nozzles, extensions and various air connections.

Forged aluminum pistol shape, anodized. lever operation.

The post Blow Guns With Standard Nozzle appeared first on Flowlines Technology LLC.

]]> Safety Silencer https://flowlinestechnology.com/product/safety-silencer/ Wed, 21 Jun 2023 05:25:36 +0000 https://flowlinestechnology.com/?post_type=product&p=1904 These safety silencers are intended for effective noise damping in the event of short-term flow peaks, such as those that occur when relieving pressurized volumes. They have flexibly mounted baffle plates and filter discs.

The post Safety Silencer appeared first on Flowlines Technology LLC.

]]> These safety silencers are intended for effective noise damping in the event of short-term flow peaks, such as those that occur when relieving pressurized volumes. They have flexibly mounted baffle plates and filter discs.
Short venting time and large blow-off volume
The axial air outlet allows blowing out in a non-dangerous direction.
Temperatures up to 90°C in continuous operation, oil and water resistant, cleaning by washing out with petrol etc. possible.
Inlet damping is decoupled.

The post Safety Silencer appeared first on Flowlines Technology LLC.

]]> High-Performance Multi-Chamber Silencer https://flowlinestechnology.com/product/high-performance-multi-chamber-silencer/ Wed, 21 Jun 2023 05:21:54 +0000 https://flowlinestechnology.com/?post_type=product&p=1903 This muffler ideally combines the three maximum requirements for a muffler: high blow-off volume ,  short venting time , high sound absorption .

The post High-Performance Multi-Chamber Silencer appeared first on Flowlines Technology LLC.

]]> This muffler ideally combines the three maximum requirements for a muffler: high blow-off volume ,  short venting time , high sound absorption .
The axial air outlet allows blowing out in a harmless direction.
Temperatures up to 90°C in continuous operation, oil and water resistant, cleaning by washing out with petrol, etc

The post High-Performance Multi-Chamber Silencer appeared first on Flowlines Technology LLC.

]]> Silencer Made of Sintered Bronze https://flowlinestechnology.com/product/silencer-made-of-sintered-bronze/ Wed, 21 Jun 2023 05:17:43 +0000 https://flowlinestechnology.com/?post_type=product&p=1902 To reduce the exhaust noise from compressed air consumers, cylinders, valves, etc. Suitable for high operating pressures and intermittent operation due to the solid design. Cleaning with all common means possible.

The post Silencer Made of Sintered Bronze appeared first on Flowlines Technology LLC.

]]> To reduce the exhaust noise from compressed air consumers, cylinders, valves, etc. Suitable for high operating pressures and intermittent operation due to the solid design. Cleaning with all common means possible.

The post Silencer Made of Sintered Bronze appeared first on Flowlines Technology LLC.

]]> Plastic Tubing https://flowlinestechnology.com/product/plastic-tubing/ Tue, 20 Jun 2023 14:28:15 +0000 https://flowlinestechnology.com/?post_type=product&p=1900
  • Plastic hoses in polyethylene or polyamide 11
  • PVC hoses for compressed air
  • PVC hoses with coupling and plug

    • The post Plastic Tubing appeared first on Flowlines Technology LLC.

    ]]>     Plastic hoses in polyethylene or polyamide 11
    Without reinforcement, minimum delivery: 10 m.

    PVC hoses for compressed air
    in extruded design. Based on DIN 20018 for rough application conditions.
    Resistant to compressed air containing water and mineral oil. Flexible, kink-resistant, abrasion-resistant and weather-resistant.

    PVC hoses with coupling and plug
    DN 7.2 (brass) fitted, with fabric insert, flexible, crystal clear, UV-resistant, conditionally resistant to oil, petrol and alkalis, unlimited shelf life.
    Standard hose for a wide range of applications in industry, mechanical and plant engineering, trade and laboratories. PVC hoses are resistant to pressure, UV radiation and aging and have an unlimited shelf life. When used with fluid oils, the plasticizer is removed from the PVC causing the tubing to lose its UV resistance and become brittle.

    The post Plastic Tubing appeared first on Flowlines Technology LLC.

    ]]>         Spiral Hose https://flowlinestechnology.com/product/spiral-hose/ Tue, 20 Jun 2023 14:17:15 +0000 https://flowlinestechnology.com/?post_type=product&p=1898 Spiral hoses completely integrated on both sides. Polyamide 11 tubing , blue. Maximum working length at approx. 80% of the stretched length (extension length). Kink-resistant, without cross-section constrictions, rotatable.

    The post Spiral Hose appeared first on Flowlines Technology LLC.

    ]]>     Spiral hoses with connectors

    Spiral hoses completely integrated on both sides. Polyamide 11 tubing , blue. Maximum working length at approx. 80% of the stretched length (extension length). Kink-resistant, without cross-section constrictions, rotatable.

    Spiral polyurethane (PU) hoses
    with axial connections, rotatable screw connections and anti-kink protection, kink-resistant, no narrowing of the cross-section, extreme flexibility, less abrasion than polyamide hoses, soft surface, significantly lower risk of scratching sensitive surfaces.

    The post Spiral Hose appeared first on Flowlines Technology LLC.

    ]]>