Showing all 11 results

  • CONNECTOR A 3- OR 4-POLE

    DIN 43650/EN175301-803
    Contact spacing 18 mm
    Rated voltage 250VAC/300VDC
    Operating current 10A

  • Connector A Molded

    CONNECTOR A / PRE-WIRED
    DIN 43650/EN175301-803
    Contact spacing 18 mm
    Rated voltage 250VAC/300VDC
    Operating current 10A

  • Delphi Metri-Pack 6-Pole

    DELPHI METRI-PACK / 6 POLE
    Rated voltage 0 bis 24 VDC
    Operating current 4A
    Cable 4 x 0,34 mm2

  • M12 Actuator Field Attachable

    M12 ACTUATOR / FIELD ATTACHABLE
    DIN IEC 61076-2-101
    M12-ports 4
    Number of contacts 5
    Rated voltage 10-30 VDC

  • Pressure Switch Transmitter

    PRESSURE SWITCH-TRANSMITTER/ -14,5 TO 5800 PSI
    Operating voltage 17 to 33 VDC
    Current consumption w/o switch. output max50 mA
    Switching current OUT1/OUT2 250 mA/each

  • Pressure Transmitter

    PRESSURE TRANSMITTER-EPT/DEUTSCH DT/ 58 to 14500 PSI
    Operating voltage (0 to 10 V) 15 to 30 VDC
    Operating voltage (4 to 20 mA) 10 to 30 VDC
    Output short-circuit-proof
    Supply voltage reverse polarity protection

  • Proximity Sensor

    PROXIMITY SENSORS / REED
    Operating voltage (2 – wire) 10 bis 240V AC (M8: 60V),
    10 to 170V DC (M8: 75V)
    Operating voltage (3 – wire) 10 bis 30V AC/DC

  • Relay Module

    RELAY MODULE · 1 NO CONTACT / COIL 24 V TO 230 V
    Switching voltage 400V AC/150V DC
    Starting/permanent current 10A/8A
    Max. power rating 2000 VA/192 W

  • ST3 CONNECTOR-DIN9680 3-POLE

    ST3 CONNECTOR-DIN9680 / 3-POLE
    Rated voltage 6 bis 24 VDC
    Operating current 25A
    Cable PIN 3 not used / 2 x 2,5 mm2

  • TYCO AMP SUPERSEAL 2-POLE

    TYCO AMP SUPERSEAL/2-POLE
    Rated voltage 0 to 24 VDC
    Operating current up to 14A
    Cable up to 2 x 1,50 mm2

  • Valve Timer

    VALVE TIMER / FORM A · B-IND.
    Contact spacing 991260: 11 mm, 990720: 18 mm
    Rated voltage 24-240V AC/DC
    Operating current 1A